• 0 Posts
  • 302 Comments
Joined 2 years ago
cake
Cake day: March 15th, 2025

help-circle
  • I would say that AI is becoming much more effective for the tokens produced. I have been running Qwen 3.8 Flash-Next on my new PC. This AI model weighs in at 120b parameters, with another 50b added via an Engram table that costs about an extra 20% in RAM for its parameter count. This is a major jump in world knowledge, and the model in question has 262k context length.

    While experimental and with rough edges, this model has been able to use Lingua Gacha to undertake a game translation project - understanding and converting a Chinese game into English.

    Agentic AI has become practical on local hardware over this last year, and there looks to be much more refinement to come.

    00000000

    What we are seeing with Anthropic and the other American companies, is a scramble to protect themselves from the consequences of badly planned data centers and poor practices in AI development. Their Chinese competition has produced much more efficient models, while delivering almost the same level of quality as American offerings. This means that local AI is becoming “good enough”, which makes data centres and AI subscriptions unnecessary for many businesses if they distrust the cloud.








  • I ebay’ed my DDR5 RDIMM 5600 RAM sticks. 32gb was $606 some months ago, the remaining six sticks was about $3,600 bucks. I was originally planning on waiting for bubbles to burst and DDR6 to be released before switching to a DDR5 platform, but the whole war with Iran threw everything into doubt.

    The US’s strategic oil reserve will likely run out within half a year, which means everything costing more. I wanted to be smart with my money and wait for a good time to buy, but this situation has ruined my planning. I bit the bullet and used a flex-pay to let me buy now.

    Is it that my discipline sucks, or is the world certain to go into a hellish handbasket? I cannot tell anymore…




  • I have my machines in at Best Buy, since the Total service is $200 bucks annual, and a proper repair shop costs $300 for a single job. One of my machines had to be RMA’d, since the motherboard had a patch of pins missing. Unfortunately, Best Buy treats motherboard swaps as an extra expense, so my Total membership isn’t helpful here.

    While I probably have the technical knowledge for installing things, my fingers are all butter and shake like jello. Thus, I have to rely on people to get the work done. :(

    Now, is the service good? Dunno. It takes four or five days for work and diagnostics to be done per job order with the Geek Squad, and there has been many things needed to be done due to the RMA situations. I will list things that pleased and bothered me about the service.

    00000

    • The concept of CPU thermal pads was novel to the person who made today’s job order. I also specified that this pad was special, as the Grizzly Kryosheet is electrically conductive and will need special handling. It bothers me that the worker didn’t know about the existence of thermal pads, seeing as it is their day job to work with PCs. They had to do research on the spot, they thought that thermal pads needing pasting before I corrected them.

    • My Geek Squad is apparently full of Advanced Repair Agents - at least three ARAs. I have the feeling some are much better than others. One of them spotted the issue with the motherboard after uninstalling a huge heatsink, which is much appreciated.

    • They refused to install the multi-GPU setup that I wanted in a tower. Partially because they said that space was an issue, and that the machine wasn’t booting for them, so they were being supremely cautious about the situation. That machine tended to have bootloops and 20+ minute boots for when it succeeded, and they couldn’t really work with it.

    The claim about space part bothers me. This is a HEDT motherboard with four PCIe slots, with extra spacing. At the very least, it should be able to host at least the RTX 4090 Slim and one of the 3060 cards, and likely all three of them.

    • They tend to discard my notes and instructions for work orders. I make a point of writing up specific stuff about the job request - technical specs of hardware, what parts I want to be especially tested, info about a thumbdrive with manuals & BIOs, requests about CMOS resetting, GPU order in the slots, ect. On one hand, they might be just simplifying the work order to what they need - but I kinda have the feeling that literacy might be an issue. Hard to say whether I am simply being arrogant or autistic?

    • I do like that they send me updates for scheduling and the like. Also, I can walk into the store and get stuff done. Today I dropped off a 2014 GPU, which is to provide basic video output for a tower if all three of my ‘real’ GPUs end up in the other machine.

    • One of my requests was for a USB hub that goes into a bay drive, was to be installed. It has three cables, a SATA, 2.0 USB cable, and a 3.0 cable, that all are supposed to connect onto the motherboard. The instructions are a small sheet, and I specified the motherboard, so that the techs can look up the motherboard diagram if they needed to. They moved the hub into a tower like how I requested, but they didn’t hook it up, citing liability and non-standard parts. However, their procedures might require a CPU to be installed so that they can test the part in question.

    • I asked them to clean up one tower, to make it presentable for selling. Apparently they used a can of dust-off, but didn’t wipe down the fan blades or ventilation grills.

    • They didn’t know about the Q-Flash+ feature when I mentioned it, and for liability reasons, wanted nothing to do with it. Which is strange. QF+ is a motherboard feature that allows a mobo that is hooked up to the PSU, to have the BIOs flashed by a thumbdrive. It takes 10 minutes, and might be safer since there is no need for CPU, RAM, and so forth to be on the board.

    • Best Buy doesn’t like to hold on to parts, even if there are future work orders in the wings. A fair bit of my time with Best Buy is moving my parts and towers between the store and my residence until a work order is in place.

    0000

    It is going to be around Sunday that one of my machines should be ready for use. I am planning on selling it, once my primary has been successfully reassembled.

    As things stand, I hope that I become much richer in the future. I want to be able to afford premium service from a dedicated repair shop, as this situation makes me feel uneasy.








  • Per wikipedia:

    Numerous individuals and companies were prosecuted related to Roosevelt’s Executive Order 6102. The prosecutions took place under the subsequent Executive Orders 6111,[15] 6260,[16] 6261[17] and the Gold Reserve Act of 1934.

    There was a need to amend Executive Order 6102, as the one prosecution under the order was ruled invalid by Federal Judge John M. Woolsey on the grounds that the order was signed by the President, instead of the Secretary of the Treasury as required.[18] A New York attorney named Frederick Barber Campbell had a deposit at Chase National Bank of over 5,000 troy ounces (160 kg) of gold. When Campbell attempted to withdraw the gold, Chase refused and Campbell sued Chase. A federal prosecutor indicted Campbell the following day, September 27, 1933, for failing to surrender his gold.[19] Ultimately, the prosecution of Campbell failed but the authority of the federal government to seize gold was upheld, and Campbell’s gold was confiscated.

    The case caused the Roosevelt administration to issue a new order under the signature of the Secretary of the Treasury, Henry Morgenthau Jr. Executive Orders 6260, and 6261 provided for the seizure of gold and the prosecution of gold hoarders. A few months later Congress passed the Gold Reserve Act of 1934, which gave legislative permanence to Roosevelt’s orders. A new set of Treasury regulations was issued providing civil penalties of confiscation of all gold and imposition of fines equal to double the value of the gold seized.